Edifier A200 AIRPULSE Active Speaker System
Edifier A200 AIRPULSE Active Speaker System. The AirPulse A200 powered speaker combines reference monitor sound quality and timeless retro styling. Guided by our design philosophy of perfection by simplicity and efficiency, considerable amount of research time was spent on designing and selecting each sub-components in the A200 including cabinet construction, speaker drivers, amplifier circuitry, and internal wiring to name a few. Not one minor detail was left unattended during the creation process on even the smallest component, which all in combination contribute to the A200’s impeccable performance.
Features
Active Bookshelf Speaker
The A200 speakers combine the quality of a reference monitor and retro wood styling into an active bookshelf speaker. Simplicity married to quality is our motto with AirPulse. Connect the speakers to each other with the connecting cable and connect the speaker to your audio source directly with included cables. These speakers are sold in pairs out of the box and includes a remote.
Phase Correcting Ribbon Tweeter
As an improvement over the A100, the horn loaded ribbon tweeter with the addition of phase correction improving upon frequency response and an increase in sound dispersion. The ribbon tweeter has a low resistance of 0.2 ohm allowing more power increasing the SPL among high frequencies leading to a wider frequency response.
Phase Correcting Ribbon Tweeter
As an improvement over the A100, the horn loaded ribbon tweeter with the addition of phase correction improving upon frequency response and an increase in sound dispersion. The ribbon tweeter has a low resistance of 0.2 ohm allowing more power increasing the SPL among high frequencies leading to a wider frequency response.
5.5-Inch Aluminum Mid-Woofer
The A200 active bookshelf speaker is equipped with a 5.5-inch aluminum alloy cone mid-range woofer unit. Larger voice coils in the A200 have less power compression and have a cooler running temperature making them incredibly durable.
Design
AirPulse’s A200 is designed by Phil Jones. His technical and aesthetic design are combined to create a new generation of audio. The cabinets are made from 25mm MDF and finished with a cherry wood veneer. 36mm professional-grade sound absorption material is lined within the cabinet to reduce unwanted coloration in your sound.
Built-in Amplifier and Receiver Components
The built-in amplifier is constructed with 3 parts of the TAS5754 Class-D amplifier chipset from Texas Instrument. Two of these chips are bridged in parallel to drive the left and right woofers while the other is in bridge mode for both tweeters. The digital input accepts signals up to 192 KHz. The hybrid-flow digital processing enriches the system processing capability.
Back Panel & Inputs
Connect your phone, laptop, computer and other devices with the following inputs. AUX, RCA, Optical and Bluetooth. The Bluetooth input uses version 4.0 and has support for aptX codec. Adjust the bass, treble and volume with the knobs located on the back. The A200 is equipped with both digital and analog inputs.
Specifications
Band | |
Tweeter Unit | Phase Correction Horn Loaded Ribbon Tweeter |
Total Power Output | L/R(Treble)10W + 10W, L/R(Min-Range and Woofer) : 55W + 55W |
Mid-Woofer | 5.5″ Aluminum Cone Neo Power Mid-Woofer |
Input Sensitivity | Balance Input 1000±50mV,AUX Input 550±50mV,Bluetooth Input 1000±50mFFs,Optical Input 350±50mFFs,Coaxial Input 350±50mFFs |
Input Type | AUX, Balance Input, Optical, Coaxial, Bluetooth |
Net Weight | 19 Kg(42lbs) |
Mid-Woofer | 5.5″ Aluminum Cone Neo Power Mid-Woofer |
Signal-To-Noise Ratio | L/R:≥90dB(A) |
Frequency Response | 46Hz-20KHz |
Net Weight | 19 Kg(42lbs) |
Weight | 22.7Kg(50lbs) |
Cabinet Size
|
203 x 355 x 295 (mm) |